Files in Singularity containers
Last updated on 2024-09-02 | Edit this page
Overview
Questions
- How do I make data available in a Singularity container?
- What data is made available by default in a Singularity container?
Objectives
- Understand that some data from the host system is usually made available by default within a container
- Learn more about how Singularity handles users and binds directories from the host filesystem.
The way in which user accounts and access permissions are handeld in Singularity containers is very different from that in Docker (where you effectively always have superuser/root access). When running a Singularity container, you only have the same permissions to access files as the user you are running as on the host system.
In this episode we’ll look at working with files in the context of Singularity containers and how this links with Singularity’s approach to users and permissions within containers.
Users within a Singularity container
The first thing to note is that when you ran whoami
within the container shell you started at the end of the previous
episode, you should have seen the username that you were signed in as on
the host system when you ran the container.
For example, if my username were jc1000, I’d expect to
see the following:
But hang on! I downloaded the standard, public version of the
hello-world.sif image from Singularity Hub. I haven’t
customised it in any way. How is it configured with my own user
details?!
If you have any familiarity with Linux system administration, you may
be aware that in Linux, users and their Unix groups are configured in
the /etc/passwd and /etc/group files
respectively. In order for the shell within the container to know of my
user, the relevant user information needs to be available within these
files within the container.
Assuming this feature is enabled within the installation of
Singularity on your system, when the container is started, Singularity
appends the relevant user and group lines from the host system to the
/etc/passwd and /etc/group files within the
container \[1\].
This means that the host system can effectively ensure that you cannot access/modify/delete any data you should not be able to on the host system and you cannot run anything that you would not have permission to run on the host system since you are restricted to the same user permissions within the container as you are on the host system.
Files and directories within a Singularity container
Singularity also binds some directories from the
host system where you are running the singularity command
into the container that you’re starting. Note that this bind process is
not copying files into the running container, it is making an existing
directory on the host system visible and accessible within the container
environment. If you write files to this directory within the running
container, when the container shuts down, those changes will persist in
the relevant location on the host system.
There is a default configuration of which files and directories are bound into the container but ultimate control of how things are set up on the system where you are running Singularity is determined by the system administrator. As a result, this section provides an overview but you may find that things are a little different on the system that you’re running on.
One directory that is likely to be accessible within a container that
you start is your home directory. You may also find that the
directory from which you issued the singularity command
(the current working directory) is also mapped.
The mapping of file content and directories from a host system into a Singularity container is illustrated in the example below showing a subset of the directories on the host Linux system and in a Singularity container:
OUTPUT
Host system: Singularity container:
------------- ----------------------
/ /
├── bin ├── bin
├── etc ├── etc
│ ├── ... │ ├── ...
│ ├── group ─> user's group added to group file in container ─>│ ├── group
│ └── passwd ──> user info added to passwd file in container ──>│ └── passwd
├── home ├── usr
│ └── jc1000 ───> user home directory made available ──> ─┐ ├── sbin
├── usr in container via bind mount │ ├── home
├── sbin └────────>└── jc1000
└── ... └── ...
Questions and exercises: Files in Singularity containers
Q1: What do you notice about the ownership of files
in a container started from the hello-world image? (e.g. take a look at
the ownership of files in the root directory (/))
Exercise 1: In this container, try editing (for
example using the editor vi which should be avaiable in the
container) the /rawr.sh file. What do you notice?
If you’re not familiar with vi there are many quick
reference pages online showing the main commands for using the editor,
for example this
one.
Exercise 2: In your home directory within the container shell, try and create a simple text file. Is it possible to do this? If so, why? If not, why not?! If you can successfully create a file, what happens to it when you exit the shell and the container shuts down?
A1: Use the ls -l command to see a
detailed file listing including file ownership and permission details.
You should see that most of the files in the / directory
are owned by root, as you’d probably expect on any Linux
system. If you look at the files in your home directory, they should be
owned by you.
A Ex1: We’ve already seen from the previous answer
that the files in / are owned by root so we
wouldn’t expect to be able to edit them if we’re not the root user.
However, if you tried to edit /rawr.sh you probably saw
that the file was read only and, if you tried for example to delete the
file you would have seen an error similar to the following:
cannot remove '/rawr.sh': Read-only file system. This tells
us something else about the filesystem. It’s not just that we don’t have
permission to delete the file, the filesystem itself is read-only so
even the root user wouldn’t be able to edit/delete this
file. We’ll look at this in more detail shortly.
A Ex2: Within your home directory, you should be able to successfully create a file. Since you’re seeing your home directory on the host system which has been bound into the container, when you exit and the container shuts down, the file that you created within the container should still be present when you look at your home directory on the host system.
Binding additional host system directories to the container
You will sometimes need to bind additional host system directories into a container you are using over and above those bound by default. For example:
- There may be a shared dataset in a shard location that you need access to in the container
- You may require executables and software libraries in the container
The -B option to the singularity command is
used to specify additonal binds. For example, to bind the
/work/z19/shared directory into a container you could use
(note this directory is unlikely to exist on the host system you are
using so you’ll need to test this using a different directory):
OUTPUT
CP2K-regtest cube eleanor image256x192.pgm kevin pblas q-e-qe-6.7
ebe evince.simg image512x384.pgm low_priority.slurm pblas.tar.gz q-qe
Q1529568 edge192x128.pgm extrae image768x1152.pgm mkdir petsc regtest-ls-rtp_forCray
adrianj edge256x192.pgm gnuplot-5.4.1.tar.gz image768x768.pgm moose.job petsc-hypre udunits-2.2.28.tar.gz
antlr-2.7.7.tar.gz edge512x384.pgm hj job-defmpi-cpe-21.03-robust mrb4cab petsc-hypre-cpe21.03 xios-2.5
cdo-archer2.sif edge768x768.pgm image192x128.pgm jsindt paraver petsc-hypre-cpe21.03-gcc10.2.0Note that, by default, a bind is mounted at the same path in the
container as on the host system. You can also specify where a host
directory is mounted in the container by separating the host path from
the container path by a colon (:) in the option:
BASH
$ singularity shell -B /work/z19/shared:/shared-data hello-world.sif
Singularity> ls /shared-dataOUTPUT
CP2K-regtest cube eleanor image256x192.pgm kevin pblas q-e-qe-6.7
ebe evince.simg image512x384.pgm low_priority.slurm pblas.tar.gz q-qe
Q1529568 edge192x128.pgm extrae image768x1152.pgm mkdir petsc regtest-ls-rtp_forCray
adrianj edge256x192.pgm gnuplot-5.4.1.tar.gz image768x768.pgm moose.job petsc-hypre udunits-2.2.28.tar.gz
antlr-2.7.7.tar.gz edge512x384.pgm hj job-defmpi-cpe-21.03-robust mrb4cab petsc-hypre-cpe21.03 xios-2.5
cdo-archer2.sif edge768x768.pgm image192x128.pgm jsindt paraver petsc-hypre-cpe21.03-gcc10.2.0You can also specify multiple binds to -B by separating
them by commas (,).
You can also copy data into a container image at build time if there is some static data required in the image. We cover this later in the section on building Singularity containers.
References
\[1\] Gregory M. Kurzer, Containers for Science, Reproducibility and Mobility: Singularity P2. Intel HPC Developer Conference, 2017. Available at: https://www.intel.com/content/dam/www/public/us/en/documents/presentation/hpc-containers-singularity-advanced.pdf
Key Points
- Your current directory and home directory are usually available by default in a container.
- You have the same username and permissions in a container as on the host system.
- You can specify additional host system directories to be available in the container.